Frequent Asked Questions

Timber Veneer Care & Maintenance

Timber Veneer

Timber Veneer is a thin layer of finely-grained wood adhered to a base timber material.

In general, timber-veneered surfaces should not be left wet/damp or with wet staining materials on them. Do not clean with harsh chemicals or cleaners that may affect the finish of the surface.

Abrasive cleaning can scratch the surface and reduce clarity.

Be careful with sharp objects so as not to scratch or mark the surface of the wood.

Veneered surfaces will change colour to a greater or lesser degree, depending on exposure to artificial or natural light over an extended period of time. The degree of change will depend on the length of exposure and the type of veneer chosen. 

Cleaning/Dusting

Only use a dry soft cloth or feather duster. Use a damp cloth to wipe a slight stain on the surface.

Temperature changes / direct sunlight

Avoid direct sunlight as it can fade or change the colour of the veneer. Expansion or contraction of the timber due to extreme temperature changes may cause damage to the surface. Use heat resistance place mats under hot food and beverages to avoid heat damage.

Spillages

Clean all spillages with a damp cloth as soon as possible. Moisture may cause damage to the coating. High humidity, steam and excessive moisture contact may cause cracking or white marking of the veneer surface.

Maintain

Consistent use of spray-type wood maintenance wax to retain the texture of wood grain.

FAQs

What types of timber veneer does Toseva supply?

Timber veneers have two broad categories, Natural and Reconstituted, we supply both of these and these consist of hundreds or more articles (species).

What is the difference between Natural and Reconstituted timber veneers?

The natural veneer is produced from the timber origin itself while reconstituted is made from further timber processing and dye to match the species or to your required design.

What is TOSEVAoriginal™ or TOSEVAsurface™?

TOSEVAoriginal™ and TOSEVAsurface™ are proprietary of Toseva.

TOSEVAoriginal™ is in unfinished (non-varnished) form. It comes in paper or hardwood ply backing without varnish, lacquer, and chemical-cure coating to change its texture.

TOSEVAsurface™ is in pre-finished (varnished) form. It comes in paper or hardwood ply backing with varnish, lacquer, and chemical-cure coating and ready to be installed onto FF&E.

For more details, please visit The Process page.

Will there be any inconsistency in timber veneers?

Yes, timber is a natural material, different trees and batches will produce different variations of colour and grains. We have over 40 years of veneer manufacturing experience. Throughout these years, with our vast understanding of the materials as well as clients’ specific requirements for their projects and usage. We have the capacity to work on such requirements and supply the suitable materials to our clients and their projects. Our Reconstituted series are re-engineered veneers made from ALPI, Italy. With the highest level of quality ensured in preparing reconstituted veneers to ensure minimum inconsistency. However, with any timber veneer products, there will still be variations between different batches of veneers.

What certifications do we have?

You can view here for some certificates. For a comprehensive list of certificates, please contact us.

Do you supply customized specifications veneers?

Yes, we can produce timber veneer materials with customized length, width, thickness, color dyeing, extures, and various backing requirements. Do reach out to our sales team at [email protected] or +65 6749 2166 (ext.104) to discuss more.

What are the standard specifications for Toseva veneers on Plywood & Paper Backings?

With Plywood Backing With Paper Backing
8’ 4’ x 8’ x 3.0mm +/-10% 2’ x 8’ x 0.30mm +/-10%
4’ x 8’ x 3.2mm +/-10% 2’ x 8’ x 0.55mm +/-10%
10’ 4’ x 10’ x 3.6mm +/-10% 2’ x 10’ x 0.30mm +/10%
4’ x 10’ x 4.0mm +/-10% 2’ x 10’ x 0.55mm +/-10%

*Note: Width x Length x Thickness

However, we can produce customized specifications according to the requirements.

Does Toseva timber veneers come with prefinished (varnished)?

Yes, we can supply in prefinished format. However, please consult our sales personnel for further information.

What type of cuts, textures and matching are there in Toseva timber veneers?

In general, the prominent cuts are Quarter, Plain and Natural Joints; the texture will be Sandbrush or Rough Cut; matching will be Book or Slip. In addition, we have Fumed or Dyed which would give the materials another look.

Can you customize the colour of timber veneers?

Yes, we are able to supply. For colours, there are Dyed colour Natural Veneers, Fumed Natural Veneers and Reconstituted veneers.

Do you have ready stocks available?

Yes, please reach out to our sales team at [email protected] or +65 6749 2166 (ext.104).

Do you supply Solid Timber materials?

Yes, please reach out to our sales team at [email protected] or +65 6749 2166 (ext.104) for further discussion.

How do I request for samples, catalogues or place an order?

Kindly contact [email protected] or +65 6749 2166 (ext.104).
Our friendly sales team will be happy to assist you.